With the Micro Centre 21 respectively 31, Microcut has two machines available which are capable of processing concentricity grinding from the bore to the outer diameter of 0.0005 mm

The product MicroGrind Dome allows back- and frontend grinding of cylindrical pins for various geometries such as chamfers, radius and step shapes, in high accuracy ranges.

The MicroGrind Cut is a  special purpose machine for pin cutting

With the Machine type Wire Grind  is a product available for grinding wires from coil to coil. Cylindrical, conical and further geometries as e.g. chip flutes can be realised
 
Workpiece gallery  


Grinding
       
             
MicroCenter 21
For highest concentricity requirements

Automatic outer diameter and concentricity grinding machine for ferrules, tubes, canons, with a reachable concentricity value from the bore to the outer diameter of < 0.5 µm		   MicroCenter 31
For the machining of glass scribers (flat screen market)

Automatic outer diameter and concentricity grinding machine with a 6-axes robot for tungsten carbide and PCD glass-scriber 		  MicroGrind Dome
For back- and front end grinding of cylindrical pins up to Ø 4 mm with various geometries as chamfers, radius and step shapes in high accuracy

 

  MicroGrind Cut
 a special purpose machine for cylindrical bars cutting up to approx. Ø 4 mm, with automated separation of first and last cut off, for hard materials
     
PDF
 
PDF
       
     
 
Further Informations
  Characteristics and tolerances of the outer diameter concentricity grinding